Stuccos and Eifs
No matter what you need to clean or treat, you'll be sure to find a product that fits your needs at Independent Material Co.
Cementitious Stucco
SPEC MIX Mortar Type 'N' (18008 and Bulk SM18008), Portland Lime & Sand mortar is a dry pre-blended mortar mix containing Portland cement, hydrated lime and dried masonry sand formulated for superior bond, water retention and board life. To be used with the various patented SPEC MIX silo systems.
Acrylic Stucco
A 100% acrylic-based textured finish. Made with Dirt Pick-Up Resistance (DPR) meaning the surface of the finish hardens and does not soften again under heat. The non-tacky surface provides high resistance to accumulation of dirt, mold, and pollutants. The finish is integrally colored with high quality pigments.
Metal Lath
Metal lath for stucco and plastering.
#66 Casing Bead
Used as a stucco/plaster stop to provide a screed edge and protective finish trim while terminating plaster or thin stone in a clear, straight line at doors, windows, and other openings.
#1A Corner Bead
No. 1-A Expanded Corner Bead is manufactured with 2-5/8” expanded metal flanges and a solid metal nose to provide for clean and sharp corners even over slightly irregular surfaces.
#15 Expansion Joint
#15 Expanded Flange Control Joint (Double-V) is used to relieve stresses in large plastered areas of walls, ceilings, and stucco areas. The Double-V Control Joint counteracts the inherent shrinkage during stucco curing and general thermal changes.